"Dari Ecomeccanica harvesters are sturdy, practical, eco-friendy and have a zero impact due to the absence of a hydraulic system. They are also equipped with a continuously variable cutting system, which makes it possible to harvest produce with a height between 0.5 and 20 cm. The precise cut reduces vegetable residues on the soil, so there is no need for trimming machines saving both time and money," explains Alberico Durso, administrator of Dari Ecomeccanica Srl in Eboli (Salerno) and founder of Durso Srl, a leading company in the manufacture of special four-wheel drive vehicles.
ELL-E harvester, EIMA 2012 red sticker
"The automatic forward system makes controlling and harvesting easier, as operators only need to accelerate or brake and the system will keep on harvesting. They have a 10-hour run time that can be extended to 12 hours thanks to a charger installed on the machine. What is more, the speed can be controlled via a simple console," explains Francesco Roselli, co-founder of Dari Ecomeccanica.
Cutting and transport system
Structurally, harvesters are equipped with a double steering axle that enables the deactivation of the front axle steering as well as a shift system that speeds up alignment operations.
Watch the ELL-E video
"In addition, thanks to the electric sorter equipped with a dual tray for the recovery of the non-selected produce, it is possible to considerably reduce waste."
Waste tray
Dari Ecomeccanica was established in 2018 as a spin-off of Durso Srl. Its mission is to supply innovative technologies for horticulture with a low emission of CO2 and other polluting elements and therefore with a minimum impact on the environment. Dari machines are in fact equipped with electric traction and drive, making harvesting healthier. But the true added value of the company are its human resources as it managed to reach countless objectives thanks to their dedication, passion, skill, professionalism and availability.
The Dari Ecomeccanica team
"Dari Ecomeccanica does not only sell machines, but also rents them for the short and long term and provides on-site assistance to its clients. Machines can be personalized depending on customer needs and crop conditions. In addition, as of September 2020, we will also provide remote assistance."
"We also provide after-sales assistance creating eco-friendly spare parts: for example, we produce 80SH food-grade polyurethane pulleys, a vast range of tempered steel cutting blades as well as other parts."
"We are thinking about an e-commerce solution for those interested in our products so as to supply them with our spares all over the world."
"In the future, we would like to strengthen our presence on the domestic market and start looking abroad. Our company is dynamic and provides innovative solutions, so stay tuned to learn more about our next projects."
Contacts:
Dari Ecomeccanica Srl
Viale Corno D'Oro ,SS 18 km 77
84025 Eboli (SA) – Italy
Tel.: +39 0828 301068
Email: info@dariecomeccanica.com
Website: www.dariecomeccanica.com
Facebook: dariecomeccanica